Add a Real Mounting Point for Your Harness Without Cutting Sheet Metal
The HBR-001WT is a 47 inch bolt-in harness bar finished in white, giving racers and track day drivers a proper structural mount for a 4 or 5 point harness without welding a roll bar into a street car.
Key Features
- 47 inch width fits a wide range of coupe and sedan interiors
- Bolt-in design, no welding required
- Steel tube construction for rigidity under harness load
- White powder coat finish
- Multiple mounting positions for harness height adjustment
Specifications
| Detail | Value |
|---|---|
| MPN | HBR-001WT |
| UPC | 840301207131 |
| Width | 47 Inches |
| Material | Steel Tube |
| Finish | White Powder Coat |
| Mounting | Bolt-In |
What’s Included
- 1x NRG 47in Harness Bar (HBR-001WT)
- Mounting hardware
About NRG
NRG Innovations builds racing seats, steering wheel hardware, and safety equipment for off road use and track day builds, focused on adjustable designs that fit across a wide range of chassis.
FAQ
What is the HBR-001WT?
The HBR-001WT is a 47 inch bolt-in harness bar from NRG finished in white, providing a structural mounting point for racing harnesses.
Do I need to weld this harness bar in?
No, the HBR-001WT is a bolt-in design that does not require welding.
What size harness does this bar work with?
This bar is designed to mount standard 4 point and 5 point racing harnesses with multiple height adjustment positions.
Will this fit my car’s interior width?
The bar measures 47 inches wide, which fits a wide range of coupe and sedan interiors, though you should confirm rear seat width before purchase.
What is this bar made from?
It is constructed from steel tube designed to handle harness loads under hard driving and racing use.
Can I still use rear seats with this bar installed?
Installing a harness bar typically requires removing or modifying the rear seat area, so this is intended primarily for dedicated track or race builds.
What color options are available?
This listing is for the white powder coat finish version of the HBR-001WT.
Does this include the harness itself?
No, this is the mounting bar only. A separate racing harness is required and sold separately.
Install Instructions
- Remove the rear seat and any interior trim blocking the mounting points.
- Position the harness bar at the desired height using the multiple mounting positions.
- Bolt the bar securely to the chassis mounting points using the supplied hardware.
- Torque all bolts to spec and verify secure attachment before use.
